Oaklahoma ATV Bridge Project

We sold this bridge system to Brian for a lake in Oklahoma. He had a large creek running through his property which floods regularly. He wanted to find a way that would allow him to retain access even during adverse weather conditions. The bridge he purchased was 48’ long and 4’ wide with a live load capacity of 1,500 lbs. and a snow load capacity of 5 lbs./sq.ft.

Brian started off by building up two raised platforms using railroad ties to ensure that the bridge would never be underwater during a flood. Brian and his friends drove the parts out to the bridge site in their truck and began the assembly process. The assembly went smoothly for the group and they were soon ready to lift the bridge and set it in place across the creek. They then installed treated plywood as decking to finish up the project. Brian was very pleased with the bridge and had several neighbors interested in installing a similar bridge on their property.
ATV Bridge Kit ready for Shipping

ATV Bridge Kit ready for Shipping

ATV Bridge Fasteners

ATV Bridge Fasteners

Railroad Tie Footing for Flood Plain

Railroad Tie Footing for Flood Plain

ATV Bridge Assembly

ATV Bridge Assembly

ATV Bridge Aluminum Cross Members

ATV Bridge Aluminum Cross Members

Wisconsin ATV Bridge Project

Wisconsin ATV Bridge Project

Wisconsin ATV Bridge Project

We sold this bridge system to Tim in Wisconsin. He had a over 100 acres of property out at his cabin in Wisconsin, but the majority of it was cut off by a small river. He wanted to find a way that would allow him to access the rest of his property with his ATV. The bridge he purchased was 40’ long and 6’ wide with a live load capacity of 3,000 lbs. and a snow load capacity of 50 lbs./sq.ft. Tim started off by building up two raised platforms using railroad ties to ensure that the bridge would never be underwater during a flood. He then drove the parts out to the bridge site with his ATV and began the assembly process. He used three sets of scaffolding to set sections of the bridge together. After he seamed up these sections, he screwed down his plywood decking to finish the assembly process.

When the pallet of parts arrived for the bridge, Tim called us and asked “Where’s the rest of it?” When the project was completed, he was amazed that a heavy-duty 40’ bridge had arrived on a single 4×8’ pallet.
6x48 bridge kit on a pallet

6×48 bridge kit on a pallet

Wooden Footing to Raise Bridge

Wooden Footing to Raise Bridge

Aluminum Bridge Parts

Aluminum Bridge Parts

ATV Bridge Installation

ATV Bridge Installation

6 Foot Wide Bridge Before Decking

6 Foot Wide Bridge Before Decking

ATV Bridge Spans 48 Feet

ATV Bridge Spans 48 Feet

Happy Rolling Barge Bridge Owner

Happy Rolling Barge Bridge Owner